|
High-pressure cleaner
Description :
The three-phase HD 10/25-4S cold water high-pressure cleaner is user friendly and offers an operating pressure of 250 bar at a maximum throughput rate of 1000 l/h.
Thanks to its upright construction, the HD 10/25-4S takes up less space than a conventional machine and is much easier to manoeuvre, especially up and down steps and stairs. Its large diameter, rubber-tyred wheels ensure maximum mobility even in difficult terrain. The push handle adjusts to the most comfortable height for the user. Accessories that are not in use can be kept safely in a separate nozzle compartment.
The easy-press trigger gun offers a high degree of user comfort since it requires less effort to hold and operate and features a servopress controller for convenient adjustment of pressure and water flow rate. The spray lance can be pivoted through 360° while operating at full pressure. Other features are the pressure switch control, which turns off the pump as soon as the trigger is released and thus extends the service life of the motor and pump, and the electronic monitoring system for the motor and pump unit. The built-in detergent tank has a capacity of 6 litres.
The HD 10/25-4S has been designed for tough daily operating conditions. The chemical-resistant brass cylinder head and stainless steel pistons with ceramic sleeves are combined with an efficient air-water cooling system to guarantee a long service life.
Application :
On farms or building sites
Removes heavy soiling quickly, thoroughly and economically
while providing exceptional operator comfort
Features & Benefits :
-0°/25°/40° triple nozzle with touchless changeover
Quick changeover from high-pressure pencil jet to 25° high-pressure fan jet, manual changeover to 40° fan jet for detergent intake and application in low-pressure mode.
-6-litre detergent tank with infinitely variable metering valve and additional nozzle compartment
Detergent available anywhere at any time, economic consumption as a result of precise metering, triple nozzle or Dirt Blaster safely accommodated on machine
-Brass cylinder head with stainless steel inlet and pressure valves and safety valve
High grade materials for a long service life, machine is protected against overload
-Detergent injector
Detergent applied in low-pressure mode by simply changing setting on triple nozzle
-Electronic motor protection system with LED display
Leakage, over/undervoltage and other operating conditions are monitored and indicated and the machine is shut down automatically in the event of a fault.
-Endurance tested, 4-pole three-phase motor (1400 rpm) with a combination of air and water cooling and motor protection switch
Powerful drive unit with optimized motor cooling and overload cut-out, good intake performance, long life
-Large rubber tyred wheels and support stand with rubber buffer
Excellent mobility even on rough surfaces and up and down steps, rock steady in operating position
-Oil inspection glass in machine cover
Pump oil level can be checked quickly and easily
Technical data :
|
| Power supply (Ph /V /Hz ) |
|
|
|
|
|
|
|
| Operating pressure (bar/MPa) |
|
|
|
|
|
|
|
| Max. water feed temperature (°C) |
|
|
|
|
|
|
|
|
|
|
|
| Dimensions (L x W x H) (mm) |
|
|
|
|
|
|
|
|
Standard accessories :
- Trigger gun, : Easy Press
- Trigger gun with soft grip
- High-pressure hose, 10 m
- Spray lance , 1050 mm
- Triple nozzle/Power nozzle, : touchless changeover
- Anti-twist system (AVS)
- 4-pole three-phase motor with air and water cooling
|
- Pressure switch control
- Large fine mesh water filter
- Electronic motor protection system with LED display
- Oil sight glass
- Servo Control
- Brass water inlet fitting
|
|
| 
